Precision Gaming Headset
3D Directional Gaming Headset Utilizing True Dolby Digital 5.1 Technology
Optimized fOr XbOX 360 • pS3 • pC • Hi-fi AudiO
.com
TRITTONUSA
.com
TRITTONUSA
•
True Dolby Digital 5.1
Surround Sound Headset
•
8 precision Speakers With individual
Sound field Controls
•
Optimized two Way Communication
for Xbox Live®, playstation Network®
And pC
•
Adjust Game Volume Separately
from Communication Volume
technologies
AX
Pro
Register your product at Trittonusa.com to
receive news, updates and promotional deals.
Visit us on the web for more information and support:
trittonusa.com
Custom earcap covers, and pad sets will be available as well, check
the site for more information.Tritton Support is available Monday thru
Friday, 8am to 5pm PST
Call us at
800-431-1176
E-mail us:
CONFIGURING AUDIO CONTROLLER
A - AX pro Headset with in-line audio control module
b - removable earcap Covers
C - replaceable ear and Headband pads
d - removable microphone
e - AX pro dolby digital & pro Logic Audio Controller
f - double power adaptors
G - Xbox Live communication recoil cable
H - digital fiber Optic Cable (remove protective caps before installing.)
i - Communication uSb Cable
J - G9 Adaptor
K - Soft Carrying Case
(Advanced)
Package Contents
G
H
I
J
E
A
F
Remove
protective
caps before
installing.
Images not to scale.
K
1
2
3
4
5
6
7
8
9
bk
bm
bn
bo
bp
FRONT
REAR
CENTER
SUB
bl
1
Optical input
2
AC input
3
Select Volume/prologic Or time delay/drC
4
time delay zone Selector
5
power button
6
pro Logic / drC button
7
Volume - / td+ button
8
Volume- / td+ button
9
dual Headphone Out
bk
Analog 5.1 output
bl
uSb mic Output
bm
power Led - indicates unit has power
bn
digital - unit is receiving a 5.1 dolby digital signal (best)
bo
pL - unit is receiving a pro Logic signal
bp
drC - dynamic range Control is turned on
The default settings of the audio controller are pre-optimized but can
be modified for user customization.
VOL/PL
Move the selector to the VOL/PL position
Button
6
will select Pro Logic on/off
Button
7
and
8
will adjust volume up and down
(Pro Logic)
When Dolby Pro Logic is “on” with an audio source
that is 2 channel, the audio will then be converted to 5.1 channel
sound. When Dolby Pro Logic is “off” with an audio source that is 2
channel, the audio will remain 2 channel stereo.
(Volume up/down)
Pressing the volume up/down one time will adjust
the volume 1dB in either direction. Press and hold the volume up
to increase the volume to the maximum level. Press and hold the
volume down to decrease the volume to the minimum level (mute).
TD/DRC
(Time Delay, Dynamic Range Control)
Move the selector to the TD/DRC position
Button
6
now becomes DRC (Dynamic Range
Compression) on/off
TD/DRC (Continued)
Button
7
and
8
will now increase or decrease
the Time-Delay
- Toggle
4
to change the time delay between the front channel and
the center channel, or the front channel and rear channels
Time Delay
–
Some users add time delay to the surround channels
to make the 3d effect more dramatic. To do this, set the switches as
shown.
Then press the + key
7
about 10 times, this will set the time delay to
max for the “Surround” channels. You can also adjust the time delay to
the center channel, simply switch the left switch to the left, however
for gaming, this typically is less commonly used.
You can also use the time delay settings if you plug auxiliary speakers
into the side outputs, and use our device to output 5.1 to them.
B
D
C
v1: Volume Adjustment Switch
v2: Master Mute
v3: Mic Mute
v4: Chat Voice Volume Knob
v5: Individual Sound Field Switches
v6: Xbox Live Connection
Volume Control
To adjust the Master Volume, move the “Volume Adjustment Switch”(v1)
one way or the other. To mute the master volume, press inward on the
toggle switch (v2)
To adjust the volume of each channel individually, first press one of
the “Individual Sound Field Switches”(v5) and then adjust the Volume
Adjustment Switch(v1). The color will change based upon the volume
level. See back of controller for key.
Repeat this for all sound fields you wish to adjust.
To adjust master volume after this, you must wait 3 seconds for all the
channels to illuminate.
To reset the volume of all channels to the same level, simply adjust the
master volume level, all the way to the
lowest level, then turn it back up again.
Voice Communication Settings
To adjust the volume of the voices of other players, use the “Chat Voice
Volume Knob” (v4).
To Mute your voice so others cannot hear you, toggle the “Mic Mute”(v3)
switch.
FRONT
REAR
CENTER
SUB
5.
plug one end of optical cable (H) into rear of Xbox360
a.
must have one of the following:
i.
High d
efinition A V cable
ii.
Hd
Audio dongle (Xbox360’s with Hdmi
output only)
6.
plug the other end of the optical cable (H) into the rear of th
e
Silver AX p
ro d
olby d
igital & p
ro Logic Audio Controller (e
)
7 .
Connect Xbox Live communication link cable to in-line volume
controller and Xbox360 controller
8.
test connections by powering on Xbox360 and AX
pro, watch
to ensure “Dolby Digital” light on audio controller illuminates
as a game or movie starts
9.
to ensure communication on XboxLive functions, press
the “Xbox Globe b
utton” when a game is loaded, and go to
personal settings\voice. e
nsure that “speakers only” is not
selected. t
his is especially important if y
ou have previously
used our other product the AX360
Connect to
Xbox 360
Connect to
PS3
Connect to
PC
with Optical
5.
plug one end of optical cable (H) into the Optical Out” on y
our
computer, the location may vary but typicall
y it is on the
rear of the computer. (Some sound-cards require additional
hardware to access the digital output, if you cannot find it,
refer to your documentation for that product or contact the
manufacturer.
6.
Connect u
Sb
Communication cable (i) to a
uS
b port on the
computer and the AX p
ro d
olby d
igital & p
ro Logic Audio
Controller (e
)
7 .
plug AX
pro round 9-pin plug into front of silver AX
pro
dolby
digital &
pro Logic Audio Controller (
e)
8.
Within the configuration of your computer, y
ou most likely
have to either enable the Spdif
output, or set it as the
default. p
lease refer to the users manual for how to do this,
as it varies by operating system and hardware make and
model.
9.
Set default input to be “u
Sb
Audio”, once again the location
of this setting will vary.
1.
Connect the AC Adaptor (f
) to AX p
ro Headset (A)
2.
plug AC Adaptor into wall outlet
3.
Connect the four analog jacks on the G9 adaptor (J) to
the 4 jacks on your computer (Some sound-cards ask y
ou
to identify what channel you have plugged in, as y
ou plug
them in. if y
our soundcard does not support this, you may
have to reference the sound card panel on the back of your
computer, or
the sound
card manual
to find
out how
the jacks
should be configured)
4.
Configure your computer in Control
panel (
pC), or Sy
stem
preferences (
mac) so that the audio output is 5.1
5.
depending upon y
our computer software configurations, you
may need to make adjustments before the mic will function.
5.
plug one end of optical cable (H) into rear of the
pS3 and the
other end of the optical cable (H) into the rear of the Silver
AX p
ro d
olby d
igital & p
ro Logic Audio Controller (e
)
6.
Connect u
Sb
Communication cable (i) to a
uS
b port on
the p
S3 and the AX p
ro d
olby d
igital & p
ro Logic Audio
Controller (e
)
7 .
plug AX
pro round 9-pin plug into front of silver AX
pro
dolby
digital &
pro Logic Audio Controller (
e)
8.
Start p
S3, go to Settings > Accessory Settings > Audio
device Settings, and set the input to “
uS
b Audio”, and
ensure that the output is set to “d
efault”. You can see a
visual confirmation that the microphone is functioning, if the
bar graph moves. if y
ou do not see any movement, ensure
all connections, including the microphone, are tight, fully
inserted.
9.
test connections by powering on
pS3 and AX
pro, watch to
ensure “Dolby Digital” light on audio controller illuminates
as a game or movie starts
Connect to
PC
with Analog
Connect to
DVD Player
Connect to
5.1 Speakers
Manufactured under
license from
Dolby Laboratories.
“Dolby”, “Pro
Logic”, and
the double-D
symbol
are registered
trademarks of
Dolby Laboratories, all rights reserved.
©2006 Microsoft
Corporation. All
Rights Reserved.
Xbox, Xbox
Live, the
Live Logo,
and the
Xbox logos
are registered
trademarks or
trademarks of Microsoft Corp.
©2007
Sony Computer
Entertainment America
Inc. All
Rights Reserved.
“PlayStation”, “PLA
YST ATION”,
“PS” Famil
y logo
and “PSP”
are
registered trademarks of Sony Computer Entertainment Inc.
XBox360
XBox360 Elite/Premium
FR
ONT
REAR
CENTER
SUB
Connecting the AX p
ro to a d
Vd
player or audio receiver is easil
y
achieved through the digital optic.
the AX
pro audio controller includes analog 5.1 outputs.
through
these outputs you can connect to a 5.1 speaker sy
stem that
is “self-powered”, meaning that the speaker system has its
own amplification. Connect the speakers accordingly per the
description:
•
front =
front speakers
•
Surround = r
ear Surround speakers
•
Ctr
/Sub
= Center Channel / Sub woofer
speakers
1.
remove protective caps from optical cable
(See
di
AGr
Am
t
O ri
GHt
)
2.
Connect AC Adaptors to AX p
ro Headset power jack and AX p
ro d
olby d
igital & p
ro Logic Audio Controller jack
3.
plug AC Adaptors into wall outlets
4.
plug AX
pro round 9-pin plug into front of silver AX
pro
dolby
digital &
pro Logic Audio Controller
prOC
eed t
O iN
diV
iduAL X
bOX 360,
pS3 or
pC with Opticlal CONN
eC
tiON
Basic 4 Step Setup for All Optical Connections
Front of PS3
CONNECTING
y
OUR AX
P
RO
E
H
E
H
I
E
H
E
H
F
A
J
v1
v2
v3
v4
v5
v6
If you experience issues, visit us on
the web at TRITTONUSA.com, or call
us at 800.431.117
6
