The following are general WARNINGS related to the setup, use, grounding, maintenance
and repair of this equipment.
* Parts included in Repair Kit
!
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvents and paint fumes, in work area can ignite or explode. To
help prevent fire and explosion:
- Use equipment only in well ventilated area.
- Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric
lamps, and plastic drop clothes (potential static arc.).
- Keep work area free of debris, including solvent, rags and gasoline.
- Sprayers generate sparks. When flammable liquid is used in or near sprayer or for
flushing or cleaning, keep sprayer at least 20 feet (6m) away from
explosive vapors.
- Do not plug or unplug power cords or turn lights on or off when flammable fumes
are present.
- Ground equipment and conductive objects in work area.
- If there is static sparking or you feel a shock,
stop operating immediately.
Do not
use equipment until you identify and correct the problem.
- Keep a fire extinguisher in the work area.
SKIN INJECTION HAZARD
High pressure fluid from spray gun, hose leaks or ruptured components will pierce skin. This
may look like just a cut, but it is a serious injury that can cause amputation.
Seek immediate surgical treatment.
- Do not point gun at anyone or any part of the body.
- Do not put your hand over the spray tip.
- Do not stop or deflect leaks with your hand, body, glove or rag.
- Do not spray without tip guard and trigger guard installed.
- Engage trigger lock when not spraying.
- Follow pressure relief procedure for your sprayer when you stop spraying and
before cleaning, checking or servicing your equipment.
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
- Do not exceed the maximum working pressure or temperature rating of the lowest
rated system component. See the technical data in all equipment manuals.
- Use fluids and solvents that are compatible with your equipment wetted parts. See
technical data in all equipment manuals. Read fluid and solvent manufacturer's
warnings. For complete information about your material, request MSDS from your
distributor or retailer.
- Check your equipment daily. Repair or replace worn or damaged parts
immediately with genuine TriTech replacement parts only.
- Do not alter or modify equipment.
- Use equipment only for its intended purpose. Call TriTech for more information.
- Route hoses and cables away from traffic areas, sharp edges, moving parts and
hot surfaces.
- Do not kink or overbend hoses or use hoses to pull equipment.
- Keep children and animals away from work area.
- Comply with all applicable safety regulations.
- Do not operate equipment when fatigued or under the influence of drugs
or alcohol.
PRESSURIZED ALUMINUM PARTS HAZARD
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents
or fluids containing such solvents in this equipment. Such use could result in a serious
chemical reaction, with the possibility of explosion, which could cause death, serious injury
and/or substantial property damage.
3
20
1*
2*
2a*
7
3*
4*
8
9
10
11
16
12
13
14
15
17
6
