Tristan Auron BT2D7013A, Руководство по эксплуатации

Страница: 39 / 58

EN-8
Select Preset Equalizer
1. Enter the EQ setup menu
Touch the EQ icon in the user interface and the EQ setup
interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ User ] / [ Flat ] / [ Classic ]
/ [ Rock ] / [ Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will
change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters
adjustment bar.
[ User ]: Set the desired audio effect.
[ Reset ]: Cancel the equalizer function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this
feature will selectively boost certain bass and
treble frequencies.
Adjust FAD BAL
You can adjust front/back/left/right balance of the speaker and the
subwoofer volume to get balanced listening effect according to the
surroundings and your interest.
1. Enter the EQ setup mode
Touch the [
] icon in the EQ interface.
2. Adjust subwoofer volume
Touch [ ] / [ ] right to "Sub" to adjust subwoofer volume from
-12 to +12.
3. Adjust fader / balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust fader / balance value
from -20 to +20.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Notes:
1. The EQ mode will change to ‘User’ automatically when you adjust
the frequency value under the modes except ‘User’.
2. The value of Sub is independent of EQ mode and can be
adjusted separately.
Basic Operations