Tripp Lite VR1208R Скачать руководство пользователя страница 1

Owner’s Manual

W

arranty

 

Registration:

  

register online toda

y f

or a 

 

chance to win a FREE 

Tripp Lite 

 

product—

www

.tr

ipplite

.com/w

arr

ant

y

Important Safety Instructions

Lifetime Limited Warranty

Installation

Fax/Modem Protection

Indicator Lights

Copyright © 2008 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners. 

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234 • www.tripplite.com

Voltage Regulator

Model: VR1208R (120V, 60Hz Input, Output)

Install your voltage regulator indoors, away from excess moisture and 

• 

heat, direct sunlight, and dust and other conductive contaminants.
For best performance, keep the indoor temperature between 0º C and 40º 

• 

C (between 32º F and 104º F ).
Leave adequate space around all sides of the voltage regulator for proper 

• 

ventilation.
Connect your voltage regulator directly to a three-wire, grounded AC 

• 

power outlet. Do not remove or modify the ground pin of the voltage 

regulator’s plug. Do not use adapters that would eliminate the voltage 

regulator’s connection to ground. 
Do not use extension cords between the voltage regulator and the AC 

• 

outlet. If necessary, a Tripp Lite surge suppressor may be used between 

the voltage regulator and the AC outlet. 
Use of this equipment in life support applications where failure of this 

• 

equipment can reasonably be expected to cause the failure of the life 

support equipment or to significantly affect its safety or effectiveness 

is not recommended. Do not use this equipment in the presence of a 

flammable anesthetic mixture with air, oxygen or nitrous oxide.

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of two 

years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or 

replacing (at its sole option) any such defective products. This warranty does not apply to equipment which 

has been damaged by accident, negligence or misapplication or has been altered or modified in any way. This 

warranty applies only to the original purchaser who must have properly registered the product within 10 days of 

purchase.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or 

exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, 

INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE 

OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP 

LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss 

of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product.You’ll be 

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been 

assigned a unique series number. The series number can be found on the product nameplate label, along with all 

required approval markings and information. When requesting compliance information for this product, always 

refer to the series number. The series number should not be confused with the marking name or model number 

of the product.

FCC Part 68 Notice (United States Only)

If your Modem/Fax Protection causes harm to the telephone network, the telephone company may temporarily 

discontinue your service. If possible, they will notify you in advance. If advance notice isn’t practical, you 

will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your 

telephone company may make changes in its facilities, equipment, operations or procedures that could affect the 

proper operation of your equipment. If it does, you will be given advance notice to give you an opportunity to 

maintain uninterrupted service. If you experience trouble with this equipment’s Modem/Fax Protection, please 

call Tripp Lite Technical Support at (773) 869-1234 for repair/warranty information. The telephone company 

may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure 

the equipment is not malfunctioning. There are no repairs that can be made by the customer to the Modem/Fax 

Protection. This equipment may not be used on coin service provided by the telephone company. Connection to 

party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for 

information.)
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without 

notice. 
Made in China.

Connect your voltage regulator to an electrical outlet.

1. 

Plug your computer and electronics into your voltage regulator’s outlets.  

2. 

NOTE: Four outlets feature Automatic Voltage Regulation (AVR) 

only and four outlets feature surge suppression only. Connect your 

computer and electronics accordingly.

Turn your voltage regulator’s power switch on.

3. 

NOTE: This connection is optional.

4. 

 

Your voltage regulator will 

work properly without this connection. 

Using telephone cords, 

connect your wall jack to the voltage regulator jack marked “IN” and 

your equipment to the voltage regulator jack marked “OUT”.

BOOST:

  This yellow light will turn ON whenever your voltage regulator 

is boosting low AC line voltage up to nominal voltage levels.

POWER:

  This green light will turn ON whenever your voltage regulator 

is receiving normal AC line voltage.

CUT:

  This red light will turn ON whenever your voltage regulator is 

reducing high AC line voltage down to nominal voltage levels.

Отзывы: