background image

14

Under normal conditions, the original batteries in the UPS system will last several years. 

The batteries are designed for hot-swap replacement (i.e. replacement while the UPS 

system is in ON mode), but some qualified service personnel may wish to put the UPS 
system in OFF mode and disconnect equipment before proceeding.

Battery Warnings

 Caution:

 There are no user-serviceable parts inside the UPS system. Battery service or 

replacement must be performed or supervised by qualified service personnel familiar 
with batteries and the required precautions.

 Caution: 

When replacing batteries, replace only with the same type and number of 

batteries.

•  Batteries can present a risk of electrical shock and burn from high short-circuit current. 

Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the 
UPS or batteries. Do not short or bridge the battery terminals with any object.  
Unplug and turn off the UPS before performing battery replacement. Use tools with 

insulated handles. There are no user-serviceable parts inside the UPS. Battery 

replacement should be performed only by authorized service personnel using the same 

number and type of batteries (Sealed Lead-Acid). The batteries are recyclable.  
Refer to your local codes for disposal requirements or visit http://www.tripplite.com/

support/recycling-program for recycling information. Tripp Lite offers a complete line of 

UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at 

http://www.tripplite.com/products/battery-finder/ to locate the specific replacement 
battery for your UPS.

5. Battery Replacement

17-06-040-932882.indb   14

6/29/2017   10:33:33 AM

Содержание SmartOnline





































































Отзывы: