Tripp Lite NGI-S08C2POE8, Руководство пользователя

Страница: 95 / 157

95
6.1.1.2. Web Configuration
Parameter Description
Global Settings
State
Select Enable to permit 802.1 x authentications on the Switch.
Note: You must first enable 802.1 x authentications on the Switch
before configuring it on each port.
Authentication
Method
Select whether to use Local or RADIUS as the authentication method.
The Local method of authentication uses the “guest” and “user” user
groups of the user account database on the Switch itself to authenticate.
However, only a certain number of accounts can exist at one time.
RADIUS is a security protocol used to authenticate users by means of
an external server instead of an internal device user database that is
limited to the memory capacity of the device. In essence, RADIUS
allows you to validate an unlimited number of users from a central
location.
Guest VLAN Configure the guest vlan.
Primary Radius
Server
When
RADIUS
is selected as the 802.1x authentication method, the
Primary Radius Server will be used for all authentication attempts.
IP Address
Enter the IP address of an external RADIUS server in dotted decimal
notation.
UDP Port The default port of a RADIUS server for authentication is
1812
.
Share Key
Specify a password (up to 32 alphanumeric characters) as the key to be
shared between the external RADIUS server and the Switch. This key