Tripp Lite NGI-S05C2POE4, Руководство пользователя

Страница: 26 / 152

26
4.3.1.2. Web Configuration
Parameter Description
PoE Configuration Settings
State
Selects
Enable
to enable the PoE function on the Switch.
Selects Disable to disable the PoE function on the Switch.
Total Power
Total PoE power budget of the device can be configured Max Power
Limit Range is 240 (W).
Total Power (P) = Current of adaptor (I) * Voltage of adaptor (V)
Port Select a port or a range of ports which to configure loop detection.
State
Selects Enable to enable the PoE function on the specific port.
Selects Disable to disable the PoE function on the specific port.
LLDP Alloc
PoE Power is allocated by LLDP MED.
Priority
Selects Critical / High / Low priority for the specific port.
Max Power Limit
Interface wise PoE power budget can be configured with respect to
requirement Maximum Power Limit Range is 30W.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
PoE Configuration Status
State
Displays the current PoE mode.