Tripp Lite NGI-M08C4-L2, Руководство пользователя

Страница: 271 / 313

271
name STRING
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#snmp enable
L2SWITCH(config)#snmp community public rw trusted-host 192.168.200.106/24
L2SWITCH(config)#snmp trap-receiver 192.168.200.106 v2c public
L2SWITCH(config)#snmp system-contact IT engineer
L2SWITCH(config)#snmp system-location Branch-Office
9.1.1.1.2 Web Configurations
Parameter Description
SNMP State
Select Enable to activate SNMP on the Switch.
Select Disable to not use SNMP on the Switch.
System Name
Type a System Name for the Switch.
(The System Name is same as the host name)
System Location Type a System Location for the Switch.
System Contact Type a System Contact for the Switch.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
9.1.1.2 Community Name
9.1.1.2.1 CLI Configurations
Node Command Description
enable show snmp This command displays the SNMP configurations.
enable configure terminal This command changes the node to configure node.
configure snmp community This command configures the SNMP community name.