Tripp Lite NGI-M05-C1, Руководство пользователя, Страница: 55 / 254

55
Port Status
Port
This field displays the port number.
State
This field displays whether the port is enabled or disabled.
Speed/Duplex This field displays the speed either
10M , 100M or 1000M and the
duplex mode
Full
or
Half
.
Flow Control
This field displays whether the port’s flow control is On or Off .
Link Status
This field displays the link status of the port. If the port is up, it
displays the port’s speed, duplex and flow control setting.
Otherwise, it displays Link Down if the port is disabled or not
connected to any device.
5.4.2. Information
5.4.2.1. CLI Configuration
Node Command Description
enable show interface IFNAME This command displays the current
port configurations.
enable configure terminal This command changes the node to
configure node.
configure interface IFNAME This command enters the interface
configure node.
interface show This command displays the current
port configurations.
interface description STRING This command configures a
description for the specific port.
The length of description is up to
240 characters.
interface no description This command configures the
default port description.
interface alias STRING This command configures an alias
for the specific port. The length of
alias is up to 64 characters.
interface no alias This command reset the alias to
default.
configure interface range
gigabitethernet1/0/PORTLISTS
This command enters the if-range
configure node.
if-range description STRINGs This command configures a
description for the specific ports.
if-range no description This command configures the
default port description for the
specific ports.