Tripp Lite NGI-M05-C1, Руководство пользователя, Страница: 183 / 254

183

The ACL name should be the combination of the digit or the alphabet.
7.2.1. CLI Configurations
Node Command Description
enable show access-list This command displays all of the access control
profiles.
configure access-list STRING This command creates a new access control
profile.
Where the STRING is the profile name.
configure no access-list
STRING
This command deletes an access control profile.
acl show This command displays the current access control
profile.
acl action
(disable|drop|permit)
This command actives this profile.
disable
– disable the profile.
drop – If packets match the profile, the packets
will be dropped.
permit – If packets match the profile, the packets
will be forwarded.
acl destination mac host
MACADDR
This command configures the destination MAC
and mask for the profile.
acl destination mac
MACADDR
MACADDR
This command configures the destination MAC
and mask for the profile.
acl destination mac
MACADDR
MACADDR
This command configures the destination MAC
and mask for the profile. The second MACADDR
parameter is the mask for the profile.
acl no destination mac This command removes the destination MAC
from the profile.
acl ethertype STRING This command configures the ether type for the
profile. Where the STRING is a hex-decimal
value. e.g.: 08AA.
acl no ethertype This command removes the limitation of the ether
type from the profile.
acl source mac host
MACADDR
This command configures the source MAC and
mask for the profile.
acl source mac
MACADDR
MACADDR
This command configures the source AMC and
mask for the profile.
acl no source mac This command removes the source MAC and
mask from the profile.
acl source ip host
IPADDR
This command configures the source IP address
for the profile.