11
6.2 Closing the Console
6.3 LCD OSD Configuration
6. Basic Operation
(continued)
Pull the release catches located on either side of the keyboard toward
1.
you to release the keyboard module, then slide the module slightly in.
Rotate the LCD module all the way down, then pull the rear catches to
3.
release the LCD module.
Let go of the catches. Using the front handle, push the keyboard module
2.
all the way in.
Using the front handle, push the module all the way in.
4.
The LCD Buttons
The LCD OSD allows you to set up and configure the LCD display.
Four buttons are used to perform the configuration, as described in the
table below:
Button
Function
MENU
When you have not entered the LCD OSD
Menu function, pressing this button invokes the
Menu function and brings up the Main Menu.
When navigating through the menus, this button
moves you right or up. When making an adjust-
ment, it increases the value.
When navigating through the menus, this but-
ton moves you left or down. When making an
adjustment, it decreases the value.
EXIT
When you have not entered the LCD OSD
•
Menu function, pressing this button performs
an auto adjustment. An auto adjustment
automatically configures all the settings for
the LCD panel to what the OSD considers
their optimum values to be.
When you have entered the LCD OSD
•
Menu function, pressing this button exits the
current menu and returns you to the previous
menu. Use it to leave an adjustment menu
when you are satisfied with the adjustment
you have made.
When you are at the Main Menu, pressing
•
this button exits the LCD OSD.
The Adjustment Settings
An explanation of the LCD OSD adjustment settings is given in the
table below:
Setting
Explanation
Brightness
Adjusts the background black level of the screen
image.
Contrast
Adjusts the foreground white level of the screen
image.
Phase
Adjusts the vertical size of the screen image.
Clock
Adjusts the horizontal size of the screen image.
H-Position
Positions the display area on the LCD panel
horizontally (moves the display area left or right).
V-Position
Positions the display area on the LCD panel
vertically (moves the display area up or down).
Color Temperature
Adjusts the color quality of the display. You can
adjust the “warmth” value, color balance, etc. The
Adjust Color selection has a further submenu
that lets you fine tune the RGB values.
Language
Selects the language that the LCD OSD displays
its menus in (English, French, German, Spanish
or Italian).
OSD Duration
Lets you set the amount of time that the OSD
displays on the screen. If there is no input for the
amount of time you choose, the OSD display
turns off.
Reset
Resets the menu and submenu adjustments
(except for language settings) to the original
factory default settings.
