13
For STATIC IP,
input your static IP, gateway, net mask and save it, restart the DVR,
and DVR will auto connect to internet
For DHCP,
Select DHCP and save it, restart the DVR and system will auto allot a IP
to use.
3.8.6 RS-485
Through RS-485 communication protocol, DVR could control speed dome camera,
adjust the RS-485 setting and setup the PTZ camera features in RS-485 and Pan/Tilt
Device field of menu.
Baud rate
: Setup the baud rate of camera from 1200 to 115200
Data Bit
: Set the data bit 7 or 8
Parity Bit
: set the parity bit in none, odd or even
Stop Bit
: set the stop bit in 1 or 2
3.8.7 Pan/Tilt/Zoom Device
Channel
: Select the channel where PTZ camera is connected.
ID
: Setup the ID of camera
Model
: Setup the protocol of camera (only support Pelco D and Li Lin)
Pan/Tilt/Zoom Test
: Using this function to test camera action by DVR keypad or
remote controller.
The icon in PTZ camera adjusting mode displays as follow.
