2
IMPORTANT SAFETY INSTRUCTIONS
ATTENTION!
To ensure optimal performance, please pay attention to the instructions in this Quick Start Guide:
•
Read these instructions.
•
Keep these instructions.
•
Follow all instructions.
•
Install the apparatus on a solid, flat, level surface that is dry, well ventilated and out of direct sunlight. Be sure that all
four feet are supported.
•
Do not use this apparatus near water.
•
Clean only with a dry cloth. Do not use liquid solvent-based cleaners.
•
Protect the detachable power chord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus. If the ac cord becomes damaged, do not use it. Immediately replace
it with a new one of the same or better rating.
•
Unplug this apparatus during lightning storms or when unused for long periods of time.
•
Do not open the equipment case or remove any of the cover panels. There are no user serviceable parts in this
equipment. Refer all servicing to qualified service personnel.
•
To prevent fire or shock hazard, do not allow liquids to spill or objects to fall into any openings of the product.
•
Use only attachments/accessories specifies by the manufacturer.
•
This unit is supplied with two 3-pin grounded AC plugs. Always insert the AC plug into a grounded outlet. Do not
remove the ground pin or disable the ground for any purpose. The main AC must be protected by a 20 Ampere circuit
breaker.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider that the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
•
Before connecting the equipment, check that the main power supply voltage rating corresponds to the local main
power supply. The rating of the main power supply voltage is printed on the equipment.
•
If replacement of the ac line fuse and any internal fuse becomes necessary, replace only with same value and type of
fuse (110V: T1A Schurter FST 5x20; 220V: T800mA Schurter FST 5x20). Never bypass the fuse.
•
It is imperative that these apparatus be operated in a well-ventilated environment and the immediate external
temperature be maintained as specified. Do not expose this apparatus to humidity, steam, smoke or excessive
dampness or dust. Maximum permissible operating conditions: 0°C to 40°C, 20-65% relative humidity. External
cooling fans may be required in some cases.
•
Do not stack any equipment directly above or below this apparatus as to protect it from overheating, as well as the
continued functionality of any equipment near and around it.
•
To completely disconnect the apparatus from the AC, completely remove the power cable from the main outlet.
•
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as when the power-supply cord or plug-in damaged, liquid has been spilled, or object has fallen into the
apparatus or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
•
Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are
placed on the apparatus.
•
The main plug of the power-supply cord shall remain readily operable.
TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD
PLUG FROM THE AC RECEPTACLE.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK.
THE 220/110V SELECTION IS NOT AUTOMATIC.
It can only be made by an authorized person. Check with your reseller for further information.
