Trinnov Audio D-MON 12, Руководство пользователя

Страница: 16 / 95

5.2 OPENING THE GUI
The D-Mon Control Panel (DMCP) can be accessed by opening a browser connection to the D-Mon processor from a networked
device such as a desktop computer, laptop, smart phone or tablet.
System Requirements
•
The device must be connected to the same IP network as used by the D-Mon processor.
•
The device must support a suitable web browser: Chrome (recommended), Safari, Internet Explorer, Firefox, etc.
•
The D-Mon processor’s network connection and IP settings must be properly configured (see 6.2.2: Setting up the CPU ).
Opening the GUI

Start your browser software and type the IP address of the D-Mon processor into the search bar – for example:
The IP address of the D-Mon processor can be found in the “About” and “Setup -> Network” tabs of the Optimizer &
Processor Control Panel (OPCP) during the setup of the processor. See 6.2.2: Setting up the CPU .

Press Enter – the GUI’s CONTROLLER page should appear:
Trouble-shooting
If the GUI does not appear, then check:
•
Is the D-Mon processor booted? (the front panel ON button should be lit)
•
Have you entered the correct IP address?
•
Are both the D-Mon processor and your networked device connected to the same IP network? (You can check the network
settings of the D-Mon processor from the OPCP GUI using the “Setup -> Network” tab. See
6.2.2: Setting up the CPU .)