ASSEMBLY INSTRUCTIONS
STEPS:
(1)Carefully remove all of the parts from the box and place on a flat surface. Check the Parts
List to make sure all of the parts are included. If there are any plastic covers to protect the end
of metal rod tips, remove the covers before assembly.
(2) Align two halves of Head and Body(Part# D,E) with each other and insert the rods on one half
into the holes on the other half then fasten them together with the Plastic Ties (Part#J); Then
instert the rods of the head into the holes of the body.(See FIG.1)
(3) Insert two posts of each Legs(Part# F) into the matching holes in the body; then insert the
rods of the Nose and Teeth (Part # A,B) into the holes on the front edge of the Head(See FIG. 2).
(4) Insert the rod of the Ear (Part #C) into the hole on the top of the head and insert the rod of
the Tail (Part #G) into the hole at the back of the body and fasten together with the plastic
ties(See FIG.2).
(5)Wrap the accessory(Part#H) around the neck. Secure the sculpture to the ground with the
Ground Stakes (Part # I); (See FIG.3).
(6) Plug in.
FIG.1 FIG.2
54IN 200L GOLD GLITTER ELEPHANT
ITEM NUMBER:TY-A-200L/4W-108(54)
A.
Nose
Qty
：
1pc
B. Teeth
Qty
：
2pcs
C. Ears
Qty
：
2pcs
D. Head-2 halves
E. Body-2 halves
F. Legs
Qty
：
4pcs
G. Tail
Qty
：
1pc
H. Accessory
Qty
：
1pc
I. Ground Stake
Qty
：
4pcs
J. Plastic Ties
FIG.3
