Trilliant SecureMesh CONN-2000, Руководство по установке

Страница: 17 / 56

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
17
Installation Guide for SecureMesh® CONN-2000 - PL-0689A
Note: Radio performance and coverage typically improves as the
height increases.
l
The radio signals to and from the CONN-2000, within the Fresnal zone, will
not be obstructed.
l
Any nearby structures do not block line of sight radio coverage.
l
Clear of thick trees or brush at installation site. The site must be maintained
free of trees in the foreseeable future.
Note: Foliage in the line-of-sight to other devices can degrade radio
performance.
Grounding Requirements
These requirements identify the primary ground point for the device location.
Warning: A proper ground protects both the CONN-2000 and the
equipment connected. Ground protection is essential if it is installed on
a tall structure or in an area where lightning occurs. It is highly recom-
mended to use an Ethernet surge suppressor device.
The techniques described here are general guidelines and do not constitute a com-
prehensive guide covering all installation scenarios.
For maximum protection, and if lightning is a threat in your area, consult a specialist in
lightning and transient protection who is familiar with your operating environment.