Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
38
Installation Guide for SecureMesh WAN® Gateway 2 - PL-0073A
Figure 21:
GATE-2000 power injector and test computer
Gateway parameters
1. Using TeraTerm, SecureCRT, or a similar terminal emulator program, establish
a Telnet session to the gateway using its configured IP address.
Note:
Unlike a SecureMesh Extender or Connector, the
GATE-2000 does not have a factory default IP address that
can be accessed through the Ethernet port.
If the gateway is still in a factory default state, the CLI must
be accessed through WiFi. Refer to
for
instructions.
2. When prompted, enter the CLI password. The default password is
public
.
3. Refer to the Command Line Reference (CLI) Guide for a list of parameters that
can be configured.
