Access Point Deployment Guide
33
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
AP Software Configuration
via Web Interface
The AP web interface can be accessed with a web browser connected locally at the data port of
the PoE injector or remotely through the backhaul network. We recommend that you use one of
the following internet browsers when using the AP web interface:
•
Microsoft Internet Explorer
®
8 or higher
•
Mozilla Firefox
®
, any version
•
Google Chrome
™
, any version
Note:
The AP web interface described in this chapter is compatible with AP software
version 6.6.0 and System Release 2.1.
Initial AP Network Configuration Prior to
Installation
The AP is shipped with the following factory default IP Network Settings:
•
IP Address: 192.168.1.1
•
Netmask: 255.255.255.0
•
Default Router: 192.168.1.254
This section covers the minimum IP network configuration required to establish remote
connectivity with the AP. This configuration must be performed prior to AP installation or onsite
