Trilithic Three, Руководство пользователя

Страница: 81 / 104

79
Model Three - Operation Manual
When all desired channels are enabled, press the
F
3
(BACK) key to
return to the Auto test screen for STEP 3 .
Spectrum Parameters
Press the
F
1
F
1
(ENTER) key to change the highlighted Spectrum test
bandwidth to 2.50 MHz, 6.25 MHz, 12.50 MHz, 25.00 MHz, 62.50
MHz, or a full-spectrum scan of the User Plan Base Channel Plan.
Use the
__
and keys to highlight the center frequency selection
for the Spectrum test. Press the
FCN FCN
0
key, enter the center frequency
numerically in MHz, and press the
F
1
F
1
(ENTER) key. This parameter
is not used if the full-span bandwidth is selected.
When the desired frequency and bandwidth have been set, press the
F
3
(BACK) key to return to the Auto test screen for STEP 3 .
There are no default channels enabled for the
Level test parameter. If Level test is selected
for the Auto test program, you must enable
one or more channels.