Trilithic EASy-PLUS, Руководство по эксплуатации

Страница: 95 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
93
7. Click the Test CGs button. The selected control lines will activate
and the video will play (with audio, if the audio option is selected).
8. Click the Stop Test button when finished (the Test CGs button will
change to
Stop Test
when the video is activated).
9. After all video tests have been completed, click the Close button to return to the
normal
Utilities
tab.
Test Outputs
The EASyPLUS Configuration software allows an operator to test the TTL
outputs. To test the TTL outputs, click the Test Outputs button.
Expansion TTL tests require the TTL Expansion Board. Select the TTL or Contact Closure
to test and then click the Start Test button. The selected output will be activated.
Click the Stop Test button when finished (the Start Test button will change to Stop Test
after the test begins). After all of the tests have been completed, click the Close button to
return to the normal Utilities tab.