Trilithic EASy-PLUS Скачать руководство пользователя

Страница: 102 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

100

Unlocking Licensed Features

The EASyPLUS Configuration software includes several additional

features which can be unlocked by entering a license key. To unlock

additional features, perform the following procedure.

1. Click the

License Feature

button. The

pop-up

License an Encoder/Decoder

Feature

window will appear, containing

the available features that can be

unlocked.

2. Contact Trilithic via email at

EASsales@

trilithic.com

to obtain a license key for the

desired feature or features.

3. Enter the key code in the

Enter Product

Key

field then click the

Continue

button.

With the EASyPLUS Configuration software connected to

the encoder/decoder, click the About button on the Utilities

tab then highlight and copy the text in the Connected EAS

Encoder/Decoder Board Information text field. Paste this text

into the email message sent to

[email protected]

obtain the license key code.

Содержание EASy-PLUS



















































































































Результаты поиска

Содержание EASy-PLUS

Отзывы:

Похожие инструкции для EASy-PLUS

Бренды по названию

Популярные бренды

Trilithic EASy-PLUS, Руководство по эксплуатации

Результаты поиска

Содержание EASy-PLUS

Отзывы:

Похожие инструкции для EASy-PLUS

Бренды по названию

Популярные бренды