Trilithic EASy-PLUS Скачать руководство пользователя страница 10

Страница: 10 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

Where to Get Technical Support

Trilithic technical support is available Monday through Friday from 8:00AM to 5:00PM, EST.

Callers in North America can dial 1-317-895-3600 or 1-800-344-2412 (toll free). International

callers should dial 1-317-895-3600 or fax questions to 1-317-895-3613. You can also email

technical support at

[email protected]

For quicker support response when calling or sending email, please provide the following

information:

•  Your name and your company name
•  The technical point of contact (name, phone number, email)
•  The serial number of the EASyPLUS Encoder/Decoder
•  A detailed description of the problem you are having, including any error or information

messages

Before any Trilithic EAS encoder/decoder can be returned for repair, Trilithic will issue a

return material authorization (RMA) number. NO RETURNED EQUIPMENT WILL BE

ACCEPTED WHICH DOES NOT HAVE AN RMA NUMBER PROMINENTLY DISPLAYED ON

THE OUTSIDE SHIPPING CARTON AND ON THE SHIPPING LABEL. A complete and full

description, in writing, regarding the service issues with the equipment must be supplied inside

the shipping container with each piece of equipment for which an RMA number has been

issued.

Hardware or software modifications and changes may occur at any

time during production, shipping, and/or during the equipment’s

life span. These changes may occur or be implemented by

Trilithic, Inc. without prior written notice or warning.

Содержание EASy-PLUS



















































































































Результаты поиска

Содержание EASy-PLUS

Отзывы:

Похожие инструкции для EASy-PLUS

Бренды по названию

Популярные бренды

Trilithic EASy-PLUS, Руководство по эксплуатации

Результаты поиска

Содержание EASy-PLUS

Отзывы:

Похожие инструкции для EASy-PLUS

Бренды по названию

Популярные бренды