Tridonic LLE G2 PRE Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 63

background image

Technical Design-in Guide Engine LLE G2 PRE KIT | 03-2020 | 1.2 | en

Optical Aspects

c

36 / 63

6.4. SDCM

The human eye can not only recognise different colours along the black body curve, but also deviations above or below this line. If an
LED has a colour temperature of 2,700 K , but is not directly located on the black body curve, it can be perceived as different from
another LED with the same colour temperature. To prevent such differences and to assign an LED unambiguously, the chromaticity
coordinate must be specified using the x, y coordinates in the colour space chromaticity diagram .

An even more accurate approach is to specify the standard deviation from the target colour, based on levels of MacAdam ellipses. The
unit for this is called "SDCM" (abbreviation for "Standard Deviation of colour Matching"). When looking directly into a light source,
these differences are perceived more strongly than in a "normal" situation where light is mainly perceived because of its reflections
from illuminated surfaces.

Colour differences within one level of the MacAdam ellipses are not visible even when looking directly into the light source. Deviations
of two to three levels (<= 3 SDCM) are considered barely perceptible. A value of 3 SDCM is good for LED light sources. For most
applications a value of 5 SDCM is still sufficient .

6.5. Binning

Chips and packages from the same production can still show small variations in colour temperature and forward voltage . If the chips
are used without pre-selection, these differences can be noticeable and interfere with the appearance.

Binning means that the chips and packages are classified according to their colour temperature and forward voltage. This leads to
groups of chips or packages that fall into a very narrow window of tolerance. If LED modules are equipped with such chips and
packages differences in appearance can be prevented.

6.6. Secondary Optics

The term Secondary Optics refers to additional optical elements that shape the light output in different forms. Secondary Optics
include e.g. reflectors, lenses or covers.

6.7. Coordinates and tolerances (to CIE 1931)

As before, the production process for TALEXX LEDs does without binning. As a result, white LEDs can be produced with normal
distribution in the range of a MacAdam-Ellipse 3. Thanks to the proximity to the Planckian curve there are no annoying colour
discrepancies.
Every module is automatically tested at the final inspection stage to ensure that all the supplied products fall within the agreed
specification.

«
...
34
35
36
37
38
...
»

Содержание LLE G2 PRE
































































Отзывы:

Нет отзывов

Похожие инструкции для LLE G2 PRE

Бренд: Jafar Страницы: 10

Бренд: Jafar Страницы: 8

Бренд: Federal Signal Corporation Страницы: 34

Бренд: NAD Страницы: 4

Бренд: NAD Страницы: 4

Бренд: Yamaha Страницы: 92

Pulsafeeder MPC Vector

Бренд: Idex Страницы: 114

Red Atom PETRA01

Бренд: Perenio Страницы: 24

ACTIVAL VY51 5H006

Бренд: Azbil Страницы: 20

Бренд: Firmtech Страницы: 19

5400 Pilot Operated

Бренд: Valve Concepts Страницы: 18

Бренд: Computherm Страницы: 40

Бренд: M-E Страницы: 36

Бренд: Allen-Bradley Страницы: 139

Бренд: Crow Страницы: 27

COMBIVERT 00F6V80-001A

Бренд: KEB Страницы: 42

Treysta D511058TC

Бренд: Danze Страницы: 9

Бренд: Excalibur Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды