Technical Design-in Guide Engine LLE G2 PRE KIT | 03-2020 | 1.2 | en
Optical Aspects
c
39 / 63
6.8. Beam characteristics
6.8.1. Lenses
With LLE G2 PRE modules, the luminaire can be produced with either a diffuser or reflectors. There must be a minimum distance of 3
mm between the active parts and the conductive optical parts, e.g., reflector to the LED module.
The suitable lenses can be found in the data sheet.
Intense
Batwing
Asymmetric
Double asymmetric
½
CAUTION!
When using reflectors in combination with a non-SELV LED Driver, protection against contact must be ensured.
This is typically achieved with optics which cannot be removed over the module.