Technical Design-in Guide Engine LLE G2 PRE KIT | 03-2020 | 1.2 | en
Mechanical Aspects
c
18 / 63
Compressive stresses
The components of the LLE G2 PRE modules (circuit boards, glob-top, lenses, electronic components etc.) are sensitive to
compressive stresses. The components must not be exposed to compressive stresses.
correct (left) and incorrect (right)
Chemical compatibility
LED modules can be damaged by other materials, if these materials have certain chemical properties. The cause for these damages
are different gaseous compounds, which penetrate into the encapsulant of the LED and thereby attack the encapsulant, the colour
conversion phosphor or the LED chips and can affect the electrical contacts or the substrate.
Application areas for chemical substances
The following are known areas in which chemical substances are used:
The following materials must be checked for their safety:
Drilling,
_
Milling,
_
Breaking,
_
Sawing,
_
and similar mechanical processing.
_
If glass or Plexiglas shields are used make sure that pressure is not exerted on the glob-top.
_
Only touch the LLE G2 PRE modules at the edges
_
use of protective coating in applications with high relative humidity (outdoor applications),
_
encapsulation of LED modules,
_
cementing of LED modules,
_
sealing of luminaires.
_
All components and auxiliaries used in the assembly of the luminaire:
_
Solvents of adhesives and coatings
_
Other so-called VOC ("volatile organic compounds")
_
All other additional substances present in the atmosphere:
_
Outgassing of adhesives, sealants and coatings
_
Cleaning agents and processing aids (e.g. cutting oils and drilling coolants)
_