EN
TROUBLESHOOTING
19
19
19
PROBLEM
POSSIBLE CAUSE
SOLUTION
THE APPLIANCE DOES NOT SWITCH ON
The power cable extension is not connected
to the mains socket.
Check that the plug on the extension cable
has been inserted into the mains supply
socket.
The power cable extension is not connected
to the appliance's power cable.
Check that the plug on the cable of the
appliance has been inserted into the socket
on the extension cable.
The electrical specifications of the appliance
should correspond to the electrical
specifications of the power supply network.
Make sure that the electrical specifications
of the appliance correspond to the electrical
specifications of the power supply network,
check the technical information on the serial
number plate.
Extension cable damaged.
Check the extension cable is not damaged,
and if it is, replace it.
Overheating of the brush head motor.
Make sure that the thermal breaker on the
back of the handlebar has not tripped. If it
has, wait a few minutes until it has cooled
down, then press the specific circuit breaker
button to reactivate the power supply and
motor operation
INSUFFICIENT DETERGENT SOLUTION
ON THE PAD HOLDER
The amount of detergent in the solution tank
is insufficient for the work that needs doing.
Make sure that the amount of detergent
solution in the solution tank is sufficient for
the work to be carried out, and if necessary
fill the solution tank.
POS.
COMPONENT
1
CONTACT BREAKER 16A
2
SWITCH 20A
3
START RELAY
4
START CONDENSER
5
WORK CONDENSER
6
MOTOR 1100W 100/115V 50/60HZ
8
PLUG
BK
BLACK
BU
BLUE
BN
BROWN
RD
RED
WH
WHITE
GNYE
YELLOW/GREEN
ELECTRICAL DIAGRAM
