Revision: 0
FlexxPump4 B
User Manual
31
EN-
6.3.4 INF-Menu operating mode Hour-Mode -h-
The INF-Menu is used to inform the user about the firmware used in the FP4 B and the
settings made and currently active (values of the adjustable variables h and c that can
be changed in the PRO-Menu).
In the INF-Menu nothing can be changed by the user. The values of the parameters are
displayed in a fixed order.
b
Alphanumerical name of the FP4 B firmware
h
set value of variable h pause time
c
set value of variable c number of cycles
400
value of the size of the lubricant cartridge
Remove the activation and programming key from the upper housing of the FP4 B
and place it on the action area.
Hold the activation and programming key on the action area. The yellow LED lights
up. Leave the activation and programming key on the action area until INF is displayed
in the LCD. Remove the activation and programming key from the action area as long
as INF is displayed in the LCD. The yellow LED disappears; the LCD flashes together
with the green LED twice.
Ü
FP4 B informs you optically on the LCD about the set values.
Insert the activation and programming key into the hole provided on the housing of
the FP4 B.
The INF-Menu can only be accessed from the OFF mode (FP4 B is switched off).
When you have entered the INF-Menu, you will return to the OFF mode.
