Revision: 0
FlexxPump4 D
User Manual
27
EN-
8.2.1 Control signal 2 seconds
The control signal 2 seconds triggers a single dispensing process. After a specified
pause time, this control signal can be repeated or another control signal can be sent.
The FP4 D reacts only in a certain operating state to control signals at PIN 2. The ope-
rating states are output by the FP4 D via PIN 4 as a high/low level and must be tapped
and processed accordingly in the PLC.
U
24V
0V
t
PIN 2
U
24V
0V
t
PIN 4
2s
>3s
Tp >22s
<7 ML >17 s
>3s
o.E.
o.E.
Tp:
Pause time
ML:
Motor running time
