Revision: 0
FlexxPump4 D
User Manual
10
EN-
3.
Description of function
3.1
General information
Nr.
Description
0
FlexxPump4 D (FP4 D)
1
Lubricant outlet, outlets (different versions possible)
2
Retaining ring
3
Housing
4
M12x1 electrical interface
5
Nameplate with designation, CE mark and serial number
6
Through hole for assembly
7
Lubricant inlet with thread for cartridge
7
6
Fig. 1: Overview FP4 D
1
2
0
The FP4 D is designed as an extremely compact double piston pump for autonomous
operation with grease as the lubricant. The pistons run force-controlled and counter-ro-
tating. The FP4 D is available as a version with one, two, three or four lubricant outlets,
see Chapter 5. The outlets are secured by an integrated non-return valve. Approx. 0.16
cm³ of lubricant is pumped during each dispensing operation; multiple dispensers can
be set one after the other.
The present FlexxPump4 as D version has to be integrated into an external control
(e.g. PLC). The FP4 D has an electrical interface with which you can control and com-
mand the FP4 D. Furthermore, the FP4 D enables remote monitoring by output signals
in order to be able to query the status and possible error messages (e.g. empty cartrid-
ge). By means of various input signals processed by the microelectronics, the FP4 D is
controlled to supply the lubrication point with the ideal amount of lubricant.
4
3
5
