4
corresponding channel.
④
EDID:
4-pin DIP switch for EDID setting and HDCP mode selection. Please refer to
the
EDID Management
for more details.
⑤
FW:
Micro-USB port for firmware upgrade.
Rear Panel
①
INPUT:
Type-A female HDMI input port to connect a HDMI source.
②
OUTPUTS:
Four type-A female HDMI output ports to connect HDMI displays.
③
DC 5V:
DC barrel port to connect an AC power adapter.
DIP Switch Operation
EDID Management
The Extended Display Identification Data (EDID) is used by the source device to match
its video resolution with the connected display. By default, the source device obtains its
EDID from the first connected display. Meanwhile, since the displays with different
capabilities are connected to the splitter, the DIP switch on the front panel can be used
to set the EDID to a fixed value to ensure the compatibility in video resolution.
The switch represents “
0
” when in the lower (
OFF
) position, and it represents “
1
” while
putting the switch in the upper (
ON
) position.
1
2
4
3
IN
1
2
3
DC 5V
IN
