Triax CGT 660, Руководство по сборке

Страница: 32 / 37

- 32 - CGT 660
s
aving data
CANCEL
Bx 1A /B
S => STORE
MEMORY
S
M
• All programmed data is saved by pressing the button.
—> You will be returned to the menu item " Selecting the module / chan-
nel strip " (page 17).
—> By pressing the button, you will be returned to the menu item
" Selecting the module / channel strip " without saving the pro-
grammed data.
s
et ting the
Ca
module
In order for this function of the CA module to be possible, stations capable of
being decoded by the CA module you are using and your smart card must be
selected in the "Station filter" – "
PROGRAM " menu (page 23).
—> Where both scrambled stations and unscrambled regional broad-
casters are transmitted via a single channel, short-term picture loss
may occur when switching between scrambled and unscrambled
broadcasts.
pid
monitoring
In this menu the PID monitoring can be switched off.
Bx 1A
PID Check CA
on
—> The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CI module is reset. Ad-
ditionally dropouts may occur if several stations are descrambled.
To prevent this the PID monitoring can be switched off.
• Use the buttons to switch " off " or " on " the PID monitoring.