- 30 -
CGT 660
r
ena ming
a
pid
In this menu you can allocate a new address to a PID retaining the complete
data content.
• First, select the desired memory location using buttons
.
• Use button
to place the cursor under the right digit of the PID input field
("
– – – –
") and set the hexadecimal number of the PID to be changed (e.g.
1FFE) using buttons
.
Bx 1A
/B
01 x1 FFE
PID
drop
• Place the Cursor below the "drop" indicator using button
.
• Enter the new PID (e.g. 1FFD) using buttons
.
Bx 1A
/B
01 x1FFE
PID
–>x1FFD
• Repeat this process in order to rename more PIDs (max. 9).
—> In order to undo any changes, select the corresponding memory
location(s) and set the hexadecimal number of the PID, which was
renamed, to "1FFF"
—> "– – – –" is displayed.
• Press the
button.
—> The "Factory reset" – "
FACTORY Defaults
" main menu is activated.
