- 22 -
CGS-2 764 C
i
nput
set tings
In this menu you select the tuner for which you would like to do the input set-
tings in the related submenus.
Bx 4
Tuner A
INPUT
OK =>
—> In order to skip the "Input settings", press button
.
—> "OK" indicates a present input signal.
• Using the buttons
select the desired tuner ("A"…"D").
• Press button .
—> The "LNB oscillator frequency, Input" – "
LNB
" submenu is activated.
lnb
osCill ator
freQuenCy
, i
nput
In this menu select the SAT input and set the oscillator frequency of the LNB
used.
LNB
In A
Bx 4A
10600 MHz
• Use buttons
to place the cursor under the digit to be set for the oscil-
lator frequency displayed.
• Press buttons
to enter the respective digit of the oscillator frequency of
the LNB used.
• Repeat the procedure by the quantity of the digits to be set.
• Use button to place the cursor under "In A" resp. "In B".
• Press buttons
to select the respective SAT input ("A" or "B").
• Press the button.
—> The "Input symbol rate, DVB mode" – "
SYMBOL
" submenu is activated.
