- 21 -
CCS-2 1002
• Select the other channel strip (page 19) and set the following menu items:
• "Channel / frequency setting" (page 19).
• "Output channel" or "Output frequency" (page 20).
• Switch on the modulator if necessary (page 20).
• Measure and note down the output level.
• Activate the "
LEVEL
" menu of the channel strip with the higher output level.
• By pressing
adjust the higher output level of the one channel strip
to the lower output level of the other channel strip incrementally ("
0
" …
"
–10 dB
").
• Press the
button.
LINE B:
—> The "Station filter" – "
PROGRAM
" menu is activated (page 24).
The input settings for the tuner are only available if "LINE A" is
selected.
LINE A:
—> The "LNB oscillator frequency" – "
LNB
" menu is activated.
lnb
osCill ator
frequenCy
(line a
only
)
Set the oscillator frequency of the LNB used in this menu.
Bx 4A
10600 MHz
LNB
• Use
to place the cursor under the digit to be set for the oscillator
frequency displayed.
• Press
to enter the respective digit of the oscillator frequency of the
LNB used.
• Repeat the procedure by the quantity of the digits to be set.
• Press the
button.
—> The "Input symbol rate" – "
SYMBOL
" menu is activated.
