- 22 -
CCE 210
Quantity of data packets
Forward error correction
Transmission channel
In this menu you set the quantity of the data packets to be transmitted, the for
-
ward error correction FEC and the transmission channel. If the forward error
correction is used the data to be transmitted is encoded in a redundant way
so that the addressee can correct transmission errors.
IP 1
/2
7 off
PKTS/FEC
Defining the quantity of data packets
• Press the
button to select the data packet digit.
• Using the
buttons define the quantity of MPEG data packets in one IP
data packet ("
1
" … "
7
").
Setting the forward error correction
• Press the
button to select the forward error correction.
—> In position "
off
" the forward error correction (FEC) is switched off.
• Using the
buttons set the value of the FEC wished ("
off", "10/9
" …
"
20/19
").
Setting the transmission channel
• Press the
button to select"
Annex…
".
• Use the
buttons to set the transmission channel wished ("
AnnexA
" /
"
AnnexB
").
• Press the
button.
—> The "Output IP address" – "
OUT-IP
" submenu is activated.
