- 20 -
CCE 210
(continuous – standard) and using the
buttons set to "
burst
".
—> Setting "
cont.
"
The data packets of the user data are collected to a great data
packet in the transport stream.
—> Setting "
burst
"
The data packets of the user data are spaced out evenly in the trans-
port stream.
• Press the
button.
—> Return to the main menu "Output signal path"
Output signal path "IP MPTS"/"IP SPTS"
In this setting the output transport stream is provided via the Ethernet socket.
If "
IP MPTS"
(
I
nternet
P
rotocol
M
ulti
P
rogramme
T
ransport
S
tream) is selected,
all services (programmes) fed in via the AV1, AV2 and ASI inputs are provided
in one multi programme transport stream with one IP address.
If "
IP SPTS"
(
I
nternet
P
rotocol
S
ingle
P
rogramme
T
ransport
S
tream) is selected,
the signal from input
- AV1 is provided in one single programme transport stream with one output
IP address (IP 1).
- AV2 is provided in one single programme transport stream with one output
IP address (IP 2).
• Press the
buttons to select the signal path wished.
Bx 2
IP SPTS
OUTPUT
=>
Bx 2
IP MPTS
OUTPUT
=>
• Press the
button.
—>
The "Transmission protocol, Port number" – "
MODE / PORT
" sub-
menu is activated.
