- 15 -
CCE 210
5.2 Programming the cassette
—> Pressing the
button for longer than 2 seconds cancels the
programming procedure. This takes you back to the programme
item "Selecting the cassette" from any menu. Any entries that have
not been saved are reset to the previous settings.
—> Entries in the menus can be saved by pressing the
key. You are
taken back to the "Selecting the cassette" menu item.
—> The parameters and functions to be set are underlined (Cursor).
• Switch on the head-end station.
—> The display shows the software version (e.g. V 43)
—> The processor reads the cassettes‘ data (approximately 10 sec-
onds).
BE–Remote
V 43
t > 10 s
Ein/
On
Selecting the cassette
• If necessary select the cassette to be programmed by repeatedly pressing
the button (e.g.
Box 2
).
—> The display shows e.g. the menu "
Bx 2 ENCODER
":
"
Bx 2
"
stands for slot 2
"
ENCODER
"
type of cassette
"
V 2
"
software version of the cassette
Bx 2
V 2
ENCODER
– – –
Bx 1
………
………
………
Bx 3
………
………
………
• Press the
button.
