- 30 -
CC2CT 800 C
o
Ptions
In this menu you select the channel strip for which you would like to do the
option settings in the related submenus.
Bx 4
A
OPTIONS
=>
—> In order to skip the "Option settings", press button
.
—> It is possible to rotate through the channel strips within the submenus
using the buttons
and
.
• Using the buttons
select the desired channel strip.
• Press button .
—> The "Transport stream ID and ORGNET-ID" – "
TS/ONID
" menu is
activated.
t
r ansPort
strea m
id
and
orgnet-id
If the stations of a transponder are split into the transport streams of several
channel strips, a new identification must be allocated to the further transport
streams to realise the channel search of the settop boxes connected without
mistakes.
If the ORGNET-ID is changed also a new NIT must be generated (page 33).
Bx 4A
/B
0x0001,0100
TS/ONID
off
• Use the
buttons to position the cursor under the digit of the hexadeci-
mal number to be set.
• Press
to set the respective digit of the hexadecimal number.
• Repeat the procedure by the quantity of the digits to be set.
• Using the button place the cursor under "
off
" and switch "
on
" the trans-
mitter identification using the
buttons.
—> By pressing the
button you return to the hexadecimal number
setting.
