Triax CC2CT 800 C, Инструкция по сборке

Страница: 26 / 38

- 26 - CC2CT 800 C
—> If a service number (e.g. " 131 ") appears instead of " TV " or " RA ",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the buttons to call up the stations in sequential order, then use
to activate (indicated by " + ") or to deactivate them (indicated by
" – ").
—> Using button all station can be activated/deactivated.
—> If a station is scrambled (indication "*"), in this menu you select
whether it should be descrambled using an adequate CA module.
• Press button twice to descramble a station (indication "X").
01/04 Bx 4A /B TV * X
• Press the button.
—> The "Station filter on/off" – " FILTER " submenu is activated.
s
tation filter on
/
off
Herein you can switch on resp. off the station filter. This influences the behav-
iour of the cassette when changing the station assignment of the input signals.
FILTER Bx 4A /B
off
– Filter on : Only stations which are selected (+) in menu Station filter – Selec-
tion will be passed. New stations will be blocked until they will be activated
in the Station filter – Selection menu (+).
– Filter off : All stations will be passed – also "new" stations – this may cause
data overflow at the output!
—> The menus Station filter on/off and Station filter – Selection influ-
ence each other:
If a station will be deactivated (–) in the Station filter – Selection
menu, the station filter is activated (on).