- 15 -
CGMM 480 / CGMS 480
• Use the
buttons to balance the higher output level of the one chan-
nel strip to the lower output levels of the other modulators used ("
0 dB
" …
"
–15 dB
").
• Press the button.
—> The "Selecting the audio signal" – "
AUDIO
" menu is activated.
s
eleCting
the
audio
signal
In this menu, you can select when using
– CGMS 480 between the audio settings "
STEREO
" or "
DUAL
" or when using
– CGMM 480 / OIRT between mono audio (
Mono L
) and the composite sig-
nal of the audio signals (
Mono L + R
).
Bx 2A
Stereo
AUDIO
• The
buttons are used to select the audio signal (CGMS 480 "
STER-
EO
" or "
DUAL
", CGCGMM 480 / OIRT "
Mono L
" or "
Mono L + R
").
• Press the button.
—> The "Storing data" – "
MEMORY
" menu is activated.
s
toring
data
Bx 2A
S => STORE
MEMORY
• All programmed data is saved by pressing the
button. You will be re-
turned to the menu item "
Selecting the module / channel strip
" (page 12).
—> By pressing the
button, you will be returned to the menu item
"
Selecting the module / channel strip
"
without
saving the pro-
grammed data.
• Select additional channel strips for programming if necessary.
