TRIATEK VMS-1655M Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 23

TRIATEK VMS-1655M Скачать руководство пользователя страница 23

VMS-1655M

This product is covered by a limited warranty. Contact your representative/branch for more details.

Software terms

Product warranty

Contact information

Contact your local branch office:

www.johnsoncontrols.com/locations

Contact Johnson Controls:

www.johnsoncontrols.com/contact-us

Patents:

https://jcipat.com

Patents

Use of the software that is in (or constitutes) this product, or access to the cloud, or hosted services applicable to this product, if any, is subject to

applicable end-user license, open-source software information and other terms set forth at

www.johnsoncontrols.com/techterms

.

Your use of this product

constitutes an agreement to such terms.

North American Emissions Compliance

United States

Canada

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area may cause harmful interference, in which case users will be required to

correct the interference at their own expense.

This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

«
...
21
22
23

Содержание VMS-1655M
























Отзывы:

Нет отзывов