ASSEMBLY AND MOUNTING INSTRUCTION
For 31903/31908
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and
identify all parts prior to building the unit. Each part is identified on the drawingfor reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item
for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and Classify them according to the illustration shown
at the side.Place the parts on a scratch free surface;
STEP 2:Make sure the power is turned off at the junction box where the fixture is
to be installed.Secure the cross bar to the ceiling junction box using junction
box screws;
STEP 3:Use the wire nuts to connect
the positive and negative wires.Connect
the ground wire to the junction box
ground port;
STEP 4: Secure the canopy to the
ceiling with The knurled ring;
STEP 5:Buckle the Quick Link to the
Loop;
STEP 6:Install the Loop to the Fixture;
STEP 7: Install the center column to
the fixture;
STEP 8:Attach the center rod bottom
with Column the bottom cap and finial;
STEP 9:Install the glass shades and
secure them with the socket rings and
socket collars
STEP 10:Install the correct bulbs(not
provided);
Finial
Bottom Cap
Bottom column
Center Rod
Loop
Fixture
Glass Shade
