They are intended for the safety of personnel and machinery as well as for maintaining the functional
capability of the machine or plant concerned, and must be observed.
The function of an emergency stop system does not necessarily cut the power supply to the drive. To
protect against danger, it may be more beneficial to keep individual drives running or to initiate specific
safety sequences.
2.4 CE conformance and Declaration of conformity
NOTICE
This product can cause high-frequency interferences in non industrial environments. This
can require measures for interference suppression like additional external EMC filters.
Conformance with the IEC 61800
is mandatory for the supply of
servo drives within the European
Community.
The servo drive meets the noise
immunity requirements to the 2nd
environmental category (industrial
environment). For noise emission
the drive meets the requirement
to a product of the category C2 un-
der certain conditions. More infor-
mation can be found in chapter
HWTSD80-TSD130_4_HardwareManual_EP006
2022-01-27
8/49
Figure 1: EC-Declaration
