How to use TAM System Explorer
Scope
Figure 11: General tab of the
scope. The most commonly used
parameters are Default Sampling
and YAxes.
Figure 12: Plot tab of the scope.
The most commonly used parame-
ters are LineColor, Name and
Sampling Time. Selecting several
plots allows for configuring them
altogether.
Figure 13: Repeat and trigger buttons. A
horizontal draggable line marks the trig-
ger level, the vertical draggable line de-
fines the time of the trigger event. The
Plot property defines the trigger source.
It is possible to store the data of each trigger event automatically to a file on the
PC
with
Auto-Save
.
Auto-save mode can be activated by clicking the pull-down-menu to the right of the repeat icon
and select
Auto-Save
. When auto-save is active, the repeat icon shows a small blue disc symbol . The
auto-saved data from the trigger events can be accessed from TAM System Explorer by clicking
File >
Open Workspace Folder > Measurements\autosave*.csv
(see also [1]).
ServoDrive-SetupGuide_EP018
2022-08-25
17
/
83
