TRIAD INSTALLATION GUIDE - 1-ZONE HIGH-POWER AMPLIFIER
www.control4.com | 1-888-400-4072 | 200-00464-A 2018-03-08 DH
INTRODUCTION
The Triad 1-Zone High-Power Amplifer delivers high-performance,
reliability, and robust amplification in a compact form factor—providing the
perfect solution for distributed audio systems. Fast wake-from-standby
time and high-resolution audio quality output make this amplifier worthy
of any audio solution. Seamless integration with the Triad Audio Matrix
Switches and other Triad Power Amplifiers provides you with an easily
configurable, fully featured audio distribution solution for any size home.
SUPPORTED MODELS
• TS-PAMP1-200 Triad 1-Zone High-Power Amplifier
BOX CONTENTS
• 1-Zone High-Power Amplifier
• IEC power cable
• Phoenix-style speaker connector
• Rack-mount kit (supports mounting 1 or 2 amplifiers)
• Mono 3.5 mm 12V trigger cable
FEATURES
• Powerful, Class-D amplification driven by ICEpower modules delivers a
dynamic, high-resolution audio experience
• With a half-rack space form factor, two amplifiers can be mounted
side-by-side in a standard equipment rack.
• Fast wake from standby using 12V trigger from Triad Audio Matrix
Switches—ideal for time-sensitive audio announcements and quick
audio zone turn on
• Standby mode saves energy by muting audio when not in use
• Three power control options—12V trigger, audio sensing, or always on
• Loop output allows you to chain multiple amplifiers together to create
large audio zones
• Over-current protection prevents amplifier channels from overloading
due to short circuits or incorrect wiring
• Thermal protection shuts down amplifier channels if thermal limits are
exceeded, preventing damage
WARNINGS
WARNING!
Do not expose the apparatus to dripping or splashing.
Do not place objects filled with liquids near the apparatus.
AVERTISSEMENT
! N’exposez pas l’appareil à l’égoutture ou à
l’éclaboussement. Ne placez pas les objets remplis de liquides près
de l’appareil.
WARNING!
To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
AVERTISSEMENT
! Pour réduire le risque du feu ou de choc
électrique, n’exposez pas cet appareil à la pluie ou à l’humidité.
IMPORTANT!
Using this product in a manner other than outlined
in this document voids your warranty. Further, Control4 is NOT
liable for any damage incurred with the misuse of this product. See
“Warranty.”
IMPORTANT
! Employer ce produit en quelque sorte autre que
décrit dans ce document vide votre garantie. De plus, Control4
n’est pas responsable d’aucun dommage encouru avec l’abus de ce
produit. Voyez que « garantie. »
IMPORTANT!
Do not defeat the safety purpose of the polarized
or grounding-type plug. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
WARNING!
To reduce the risk of fire, do not install this device in
a cabinet that is smaller than 20” (50.8 cm) wide × 20” (50.8 cm)
deep × 12” (30.5 cm) high. If you do, the device may overheat.
AVERTISSEMENT
! Pour réduire les risques d’incendie, ne pas
installer cet appareil dans une armoire qui est plus petit que 20”
(50.8 cm) de large × 20” (50.8 cm) de profondeur × 12” (30.5 cm)
de haut. Si vous le faites, l’appareil peut surchauffer.
FRONT AND REAR PANEL DESCRIPTIONS
FRONT PANEL 1-ZONE HIGH-POWER AMPLIFIER
A
Zone Status LED
—Lights blue when an amplifier zone is on, red if in
overcurrent protection, and orange if in thermal shutdown
• Power LED
—Lights blue when amplifier powers on.
BACK PANEL 1-ZONE HIGH-POWER AMPLIFIER
• Power connector—
Use the supplied power cord to connect power.
• LINE IN—
RCA connectors for stereo line in.
• LOOP OUT—
RCA connectors for a line-level stereo audio out. Loops out
whatever audio device is plugged into
LINE IN
.
• 12V TRIGGER IN/OUT—
Trigger input for 12V control of amplifier power.
Connects to trigger output of audio matrix or other 12V trigger device.
Trigger output can be used to chain 12V control to another amplifier
trigger input.
• POWER MODE—
Set to
ON/12V/AUDIO
to configure the amplifier’s
power setting
.
• MONO/STEREO switch—
Sets the amplifier in stereo (2 channel) or
mono (2 channels mono-summed) mode.
• CLIP LED—
LED turns red when input gain is too high, causing the
amplifier zone to clip. Adjust the
GAIN
down when clipping occurs.
• GAIN—
Dial is used to adjust input level. The recommended starting gain
level is 6.
• ZONE OUTPUT—
1 zone output using a Phoenix-style connector for
speaker wiring connections.
A
B
A
B
C
D
E
F
G
H
I
A
B
A
B
C
D
E
F
G
H
I
