Mounting shims (4)
1/4-20 x 0.75” screws (2)
9/64” Allen wrench
3/16” Allen wrench
Supported VESA patterns
Product weight
Shipping weight
Bracket material
200 - 600 mm × 200 - 400 mm
10 lb / 4.5 kg
15 lb / 6.8 kg
3 mm P&O steel
SPECIFICATIONS
DIMENSIONS - Soundbar TV Bracket
Deep paddles (2, attached)
Shallow paddles (2)
VESA 200 - 400 mm
VESA 200 - 600 mm
22 15/16"
[58.2 cm]
5 7/16"
[13.7 cm]
INSTALLATION
1
Install the EZ Mount posts and
knobs supplied with the soundbar.
(If soundbar has 4 holes, use the
two center holes as shown.)
2
Shallow option:
Soundbar is
thinner than thickest part of TV
Deep option:
Soundbar is thicker
than thickest part of TV
4
Shallow only—Swap lower section of soundbar bracket over to shallow paddles.
TRIAD INSTALLATION GUIDE - SOUNDBAR TV BRACKET
WARRANTY
Soundbar bracket assemblies (2)
Limited Hardware Warranty—Triad Speakers warrants its hardware product to be free
from defects in material and workmanship during the warranty period. If the hardware
proves to be defective in material or workmanship during the warranty period, Triad
Speakers will, at its sole option, repair or replace the product with a like product. The
warranty extends only to products purchased directly from Control4 Corporation or
an Authorized Control4 Dealer. For complete limited warranty information, including
details on purchaser legal rights as well as limited warranty exclusions, visit
http://triadspkrs.co/warranty.
Return Merchandise Authorization (RMA) information
For Sales RMAs contact your Inside Sales Associate. Your ISA information can be
found in the My Account section of the Dealer Portal under Control4 Contacts.
Technical Support information
Phone: 503-517-2668
Hours: 9:00 a.m. – 5:30 p.m. PST (Monday – Friday)
Email: [email protected]
DEEP
DEEP
DEEP
Decide if you need the deep paddles or the shallow paddles. The bracket is
shipped with the deep paddles installed.
Lay TV and soundbar “face down”
on a protected work surface.
INTRODUCTION
The Triad
TS-
BKT-SBTV Soundbar TV Bracket is designed to attach a Triad Micro
or Mini Soundbar to a flat-panel TV that is mounted to a wall with a VESA-
compliant articulating (full-motion) wall mount. The TS-BKT-SBTV allows the
soundbar to be positioned directly below the TV and move "as one" with the
movement of the TV. The TS-BKT-SBTV also allows for the soundbar to be
adjusted (forward, backward, left, and right) so that the front of the soundbar is
flush and in-line with the front edge of the flat-panel TV.
IN THE BOX
NOTICE / CAUTIONS
Important:
The TS-BKT-SBTV has been designed to hold and support the weight of
Triad's largest and heaviest soundbars. This bracket should only be used with
articulating TV wall mounts that have met a third-party safety certification
(example: UL Certified).
Important:
The TS-BKT-SBTV physically attaches between the TV and the TV
wall-mount bracket. Carefully check the TV mount's manual for maximum weight
allowed / recommended. Add up the weights of all items: TV + So
TS-BKT-SBTV and confirm before proceeding with the use of this bracket.
Warning!
Pinch points—There are moving / hinged parts on the
TS-BKT-SBTV that can cause a pinch while installing. These will be
called out in this manual with the following indication:
2
1
2
3
a
Remove the nut on the end of the
bar using the provided wrench.
b
Loosen the nuts on the paddle if
needed.
c
Remove the deep paddle from the
rest of the bracket.
d
Loosen the nuts on the shallow
paddle if needed.
e
Add the shallow paddle onto the
bar.
f
Secure the deep paddle by replace
the nut on the end of the bar and
tightening the nuts.
a
b
c
d
e
f
7/16” open-end wrench
Mounting shim dimensions
40 × 80 × 8 mm
SUPPORTED MODELS
Model number
Supported soundbar models
Triad Soundbar TV Bracket, TS-BKT-SBTV
All full-size Triad Micro and Mini Soundbars
Supported TV mounts
Most articulating (full-motion) UL-certified mounts
DEEP
DEEP
SHALLOW
SHALLOW
