SUPPLY VOLTAGE:
• 10 to 30 VDC
• Polarity Protected
Note: For use in Class 2 circuits
CURRENT REQUIREMENTS:
• 35 milliamps max. at 24VDC
OUTPUT TRANSISTORS:
• (1) NPN and (1) PNP sensor output
transistors
• Outputs sink or source up to 150
milliamps (current limit)
• All outputs are continuously short circuit
protected
REMOTE AUTOSET INPUT:
Selectable: Advanced Options
• NPN Input, Connect to 0VDC
• PNP Input, Connect to 10-30VDC
RESPONSE TIME:
• Light state response = 240 microseconds
• Dark state response = 240 microseconds
LASER LIGHT EXPECTANCY:
• 50,000 hours @ 25ºC
LIGHT SOURCE:
• Red Laser: Class 1 or II
• EN 60825-1 (2003)
SPOT SIZE:
• Short Range: .05" X .03" @ 6"
• Long Range: .07" X .05" @ 18"
• Retroreflective: .1" X .1" @ 5'
PUSHBUTTON CONTROL:
• Two push buttons
AMBIENT TEMPERATURE:
• -40ºC to 70ºC (-40ºF to 158ºF)
RUGGED CONSTRUCTION:
• Chemical resistant high impact
ABS plastic housing
• Waterproof rating: IP68
• Conforms to heavy industry
grade CE requirements
• RoHS Compliant
DIMENSIONS:
• Width: 2.037in (51.73mm)
• Height: 2.005in (50.9mm)
• Depth: .812in (20.6mm)
FOCAL DISTANCE:
• Short Range Proximity: 6" (
152mm)
• Long Range Proximity: 18"(456mm)
• Retroreflective: 5' (1.520m)
Note: Ranges are determined by optimal
beam spot focus. Increased ranges are
possible, but are application specific and
can not be adequately specified herein.
Installation Manual
Specifications
Accessory:
AR51 High Performance Laser Reflector 51mm
2.362”
(60 mm)
0.625”
(15.9 mm)
1.575”
(40
mm)
7.87”
(20 mm)
2.621”
(66.6 mm)
10°
Slot Width:
.173”
(4.4mm)
SLB-1
6’ (1.83m), 5-CONDUCTOR,
26 AWG, SHIELDED
RoHS Compliant
Product subject to change without notice.
Connections and Dimensions
SMARTEYE
®
S
MART
D
OT
TM
P.O. BOX 25135, TAMPA, FL 33622-5135
813-886-4000 / 800-237-0946
ttco.com / [email protected]
070-0225
OUTPUT INDICATOR
Red LED illuminates when when outputs
are ON. Flashes when short circuit or
overload detected
AUTOSET
1. Press and hold for 2 seconds to initiate
AUTOSET.
2. When in Menu, momentarily tap for
making changes to Menu Options.
3. When in normal operation, momentarily
tap to adjust threshold up
(+)
.
OLED NUMERICAL DISPLAY
1. 1 to 10 bar Contrast Indicator
2. Numerical display provides visual
feedback of threshold settings and signal
strength feedback.
3. Displays button lockout, AUTOSET
mode, timers on/off, and output mode.
MENU BUTTON
1. Push and Hold for 2 seconds to enter
Menu options mode.
2. When in Menu options mode, tap to
scroll through available options.
3. When in normal operation, momentarily
tap to adjust threshold down
(-)
.
Signal
Strength
Threshold
Number
Light State
Dark State
AUTOSET
Locked
Contrast
Indicator
Light On
Dark On Output
Timer’s on
AUTOSET: (A)
•
Proximity Sensing
- Push and hold
"A"
button for 2 seconds with product in view for Light State AUTOSET. Push and
hold
"A"
button for 2 seconds with product NOT in view for Dark State AUTOSET.
(Note: Choose Light On Output for leading edge triggering, Dark On Output for trailing edge triggering.
•
Retroreflective Sensing
- Push and hold
"A"
button for 2 seconds with reflector in view for Light State AUTOSET.
Push and hold
"A"
button for 2 seconds with product blocking the reflector for Dark State AUTOSET.
(Note: Choose Dark On Output for leading edge triggering, Light On Output for trailing edge triggering.)
MENU: (M)
Press and hold "M" button for Menu access. Tap
"M"
button for scrolling through selection options. Tap
"A"
button to
change selection.