TRI tool PIPEMASTER PFM816 Скачать руководство пользователя

Страница: 65 / 65

3041 Sunrise Blvd.

Rancho Cordova, CA 95742

(800) 345-5015

(916) 288-6100

www.tritool.com

EYE HAZARD

- Always wear appropriate eye protection while

operating the equipment.

PINCH HAZARD

- Keep your hands and clothing away from

moving parts.

CRUSH HAZARD

- The machinery, pipe, or work piece can shift,

separate, lurch, or fall.

CHIP HAZARD

- Metal chips may be hot and sharp. Be careful

when you clear the tooling path or clean up chips.

TIE DOWN HAZARD

- Deliberate overriding of safety triggers can

result in serious injury. Never lock or

tie down safety triggers on the machine.

SHOCK HAZARD

- Ensure that the equipment is properly

installed and grounded. Ensure that the

equipment is not damaged and that

the power cord is intact.

OTHER HAZARDS

•

Tool bits are sharp and can cause serious injury.

• Do not defeat or modify safety features.

• Disconnect power sources before servicing or moving the equipment.

• Remove all loose articles of clothing and jewelry before operating the equipment.

Be Safety Conscious!

©Copyright Tri Tool Inc. PN 81-0542 (06-14)

WARNING

Read the manual and be familiar with all safety precautions before operating

equipment. The following are general warnings for industrial equipment with moving

parts. Refer to the manual for specific warnings applicable to your equipment.

Содержание PIPEMASTER PFM816


































































Результаты поиска

Содержание PIPEMASTER PFM816

Отзывы:

Похожие инструкции для PIPEMASTER PFM816

Бренды по названию

Популярные бренды

TRI tool PIPEMASTER PFM816, Руководство по эксплуатации

Результаты поиска

Содержание PIPEMASTER PFM816

Отзывы:

Похожие инструкции для PIPEMASTER PFM816

Бренды по названию

Популярные бренды