TRI tool BEVELMASTER 236B Скачать руководство пользователя

Страница: 7 / 39

Model 236B BEVELMASTER™

92-1306 : Rev. 090225

SPECIFICATIONS

The Model 236B BEVELMASTER™ is designed for facing, beveling and/or
counterboring the ends of pipe or tubing in preparation for welding.

These machining operations may be performed either simultaneously or separrately.

Pipe weld preparations that meet all existing conventional codes including the more
stringent nuclear codes may be machined using the Model 236B.

The various interchangeable Jaw Blocks, Ramps and Adapter will secure the Model
236B BEVELMASTER™ to pipe and tubing having an inside diameter of 11.43”
(290.4 mm) minimum, with a maximum outside diameter of 36.00” (914.4mm).

The expanding Mandrel provides fast, accurate self-centering and alignment to the
pipe or tubing to be machined.

The Lathe accepts it’s own torque through the Mandrel generated by machining
operations. No additional torque restraining devices are required.

The Model 236B is provided with a lathe stand and hoist ring.

Various attachments are available to further enhance the capabilities of the Machine.

SPECIFICS

Weight

1200 lbs (554 kg) complete with Stand.

Power Requirements

20 GPM at 1250 PSI (1.3 L/s at 8619 kPa)

Feed Rate

.033” (.84 mm) per rev of the Feed Handle

Feed Travel

5.00” (127.0 mm)

Rotating Head Diameter

40.00" (1016.0 mm)

Содержание BEVELMASTER 236B








































Результаты поиска

Содержание BEVELMASTER 236B

Отзывы:

Похожие инструкции для BEVELMASTER 236B

Бренды по названию

Популярные бренды

TRI tool BEVELMASTER 236B, Руководство пользователя

Результаты поиска

Содержание BEVELMASTER 236B

Отзывы:

Похожие инструкции для BEVELMASTER 236B

Бренды по названию

Популярные бренды