11
CAUTION: if you want to open the tank, wait a few
minutes and then unscrew the cap very slowly so to
release residual steam from the tank.
Do not use the device as a heating unit.
Always unplug before you fill or empty the tank. We
recommend the use of
distilled water
to avoid excessive
fouling (not covered by warranty).
Do not overfill the water tank and do not to introduce into
the tank mixtures for removing stain, vinegar, descaling
agents or chemicals in general.
Use provided measuring cup and funnel to fill the tank;
do not supply it directly under the tap or with cold liquids.
Do not expose the product to high temperatures and do
not place it near heat sources. Do not immerse in water or
other liquids; always clean it with a damp cloth.
Fill the tank when you notice a decrease in the jet of
steam. Before filling the tank, disconnect the power cord
from the electrical outlet.
When the water is finished, the unit will automatically
shut down to prevent damage.
When using, do not tilt over 45°. Do not direct the flow of
steam towards people, animals, electrical equipment,
CAUTION: the steam outlet nozzle becomes very hot:
be careful not to burn yourself. Do not put your face
in front of the steam coming out of the nozzle.
DESCRIPTION AP30
(1) Tank
(2) Short spout
(3) Safety cap
(4) Steam emission button
(5) Handle
(6) Power cord
(7) Control light
(8) Funnel
(9) Measuring cup
(10) Round brush
(11) 90° nozzle
(12) Main spout
(13) Flexible hose
(14) Brush
(15)
Mirror brush
(16) Cloth
OPERATING
The device can be used to disinfect and sterilize surfaces, clean clothes, doors, windows, mirrors, remove the
dirt in the grooves between tiles, etc. ...
-
Unscrew the cap (3) by turning it counterclockwise.
-
To fill the tank, insert the funnel (8) and enter the water using the measuring cup (9, 150ml capacity)
without exceeding the maximum capacity of the tank (250ml).
-
Screw the cap and connect the plug to the power outlet. The control lamp (7) will light on and the boiler